| Product | Package | Description | Data Sheet | Pricing | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 904 |
 QFN 4×4, 24 leads |
LED driver for portable applications. Accepts battery voltage between 1.8 – 6.5V. Intended for boost or SEPIC topologies. Optimized for operation with 1 to 4 LEDs at 1A. |
 |
|
||||||||
| 905 |
 QFN 4×4, 24 leads |
LED driver for portable applications. Accepts battery voltage between 1.8 – 6.5V. Intended for boost or SEPIC topologies. Optimized for operation of up to 10 LEDs at 1A. Capable of driving external FETs if more power is desired. |
|
|
||||||||
| 906 |
 QFN 4×4, 24 leads |
LED driver for portable applications. Accepts battery voltage between 3.8 – 30V. Intended for boost or SEPIC topologies. Optimized for operation of up to 10 LEDs at 1A. Capable of driving external FETs if more power is desired. |
|
|
||||||||
| 907 |
 QFN 4×4, 24 leads |
LED driver for portable applications. Accepts battery voltage between 3.8 – 30V. Intended for buck topologies. Optimized for operation of up to 10 LEDs at 1.5A. Capable of driving external FETs if more power is desired. |
|
|
||||||||
| 908 |
 QFN 4×4, 24 leads |
Power management controller for AC powered LED lighting products. PFC, LED brightness control, and auxiliary 12 Vdc power generation. Configurable from 12 to 277 VAC line voltages. Conduction angle dimmer compatible with 128 to 1 brightness control and LED over-temperature management. Auxiliary 12 Vdc power generation always enabled. |
|
|
||||||||
| 909 |
 QFN 4×4, 24 leads |
Power management controller for AC powered LED lighting products. PFC, LED brightness control, and auxiliary 12 Vdc power generation. Configurable from 12 to 277 VAC line voltages. Conduction angle dimmer compatible with 128 to 1 brightness control and LED over-temperature management. Auxiliary 12 Vdc power generation enabled by EN or MO inputs. |
|
|
| Product | Board | Description | Data | Pricing |
|---|---|---|---|---|
| 802-01 |
 4.5 x 1.8 inches |
“Feature Board”: Control board with switches, light sensor, descriptive graphics, and connectors to control and demonstrate the 50804 – 50807 boards. Comes with 12 inch ribbon cable and 8 pin dual in-line header for the 50804 – 50807 boards. |
 |
$45.00 |
| 804-01 |
 1.2 x 1.2 inches |
Evaluation board for 904 part. Boost configuration. Use with one LED, ~3.2 volts at 360 mA, 1.2 watts out. Battery voltage 1.8 to 3.2 volts. |
|
$50.00 |
| 804-02 |
1.2 x 1.2 inches |
Evaluation board for 904 part. Boost configuration. Use with three LEDs, ~10 volts at 120 mA, 1.2 watts out. Battery voltage 1.8 to 6.5 volts. |
|
$50.00 |
| 804-03 |
1.2 x 1.2 inches |
Evaluation board for 904 part. Boost configuration. Use with four LEDs, ~13 volts at 360 mA, 4.6 watts out. Battery voltage 2.7 to 6.5 volts. |
|
$50.00 |
| 805-01 |
 1.8 x 1.8 inches |
Evaluation board for 905 part with external boost FET. Boost configuration. Use with nine LEDs, ~31 volts at 360 mA, 11.3 watts out. Battery voltage 3.6 to 6.5 volts. |
|
$60.00 |
| 805-02 |
1.8 x 1.8 inches |
Evaluation board for 906 part with external boost FET. Boost configuration. Use with nine LEDs, ~31 volts at 1000 mA, 31.5 watts out. Battery voltage 10.8 to 15 volts. |
|
$65.00 |
| 806-01 |
 1.8 x 1.8 inches |
Evaluation board for 906 part. SEPIC configuration with external boost FET. Use with two LEDs, ~6.5 volts at 1000 mA, 6.5 watts out. Battery voltage 5.4 to 15 volts. |
|
$60.00 |
| 807-01 |
 1.2 x 1.8 inches |
Evaluation board for 907 part. Buck configuration. Use with one LED, ~3.3 volts at 720 mA, 2.4 watts out. Battery voltage 5.4 to 15 volts. |
|
$50.00 |
| 808-01 |
 1.8 x 1.8 inches |
Evaluation board for 904 part. SEPIC configuration. Includes control switches, jumpers and ambient light detector for all modes. Use with one LED, ~3.2 volts at 360 mA, 1.2 watts out. Battery voltage 1.8 to 6.5 volts. |
|
$60.00 |